Liquid Detected in Lightning Connector: How to Fix? (2023)

Are you seeing a notification on your iPhone that liquid was detected in the Lightning connector? Stay tuned to find out why! In 2018, Apple launched the iPhone XS and XR, successors to the groundbreaking iPhone X, which attracted attention with attractive designs and handy features. One of these features is a safety mechanism that prevents the phone from charging.

If you get a notification that charging an Apple device is prohibited, don't worry - it's not a malfunction, it'ssecurity measures. But what causes this notification? Please join me in investigating this error message and finding its cause. Finally, I'll give you a simple self-help guide to help you figure things out on your own.。

Let's move on.

What's thisLiquid detected, Lightning connector not detectedmistake?

So why is your iPhone talking all the timeLiquid detected, Lightning connector not detected? The error notification is noticeable and appears when you try to connect a charger or accessory to the Lightning port on your iPhone.

If you see this notification, there is moisture in the Lightning port or Lightning cable. For safety reasons, charging has been disabled on your iPhone to prevent possible damage.

As part of Apple's security mechanisms, iPhones are equipped with smart liquid sensors that can detect even the tiniest drop of water in the Lightning port. So whenever you connect a Lightning charger or accessory to the port, charging will immediately pause and you won't be able to use the port until it's completely dry.

Here are two notifications you may have received:

1. Fluid detected, not the Lightning connector:

A notification is triggered when you connect a Lightning accessory, such as headphones or a power bank, to your iPhone and liquid is detected in the Lightning connector. To protect your phone from possible damage, charging has been temporarily stopped.

2. Cannot charge:

Likewise, when you connect an iPhone charger to a device and it stops charging because the Lightning port detects moisture, you will be alertedunable to upload。

Why am I getting liquid detected in Lightning Connector notifications?

According to research, exposure to water is the leading cause of cell phone damage. Attempting to charge your iPhone through a wet Lightning port may corrode the pins or port cable, causing permanent damage or connectivity issues to your iPhone or accessory.

Also, when connected to a power source, water in the port may cause a short circuit and possibly damage important chips on the phone's motherboard.

Apple built smart humidity sensors into iPhones to avoid costly repairs. These sensors detect the presence of water and immediately stop charging to keep your device safe. As a result, you won't be able to charge your iPhone or use accessories until the system deems it safe.

Luckily, Apple offers a way to bypass liquid detection and charge your iPhoneEmergency situations. You can do this by reconnecting your iPhone to a Lightning cable or accessoryBypass liquid detection and charge your device when needed.

how to fixLiquid detected, Lightning connector not detectedmistake?

now we know whyLiquid detected, Lightning connector not detectedproblem, let's see how to handle this situation:

1. Restart your iPhone:

Let's start with the simplest and most effective solution - a quick reset. If you're sure your iPhone hasn't been exposed to water, restart it and reconnect the charger. In many cases, the user can charge the phone after resetting.

2. Dry your Lightning accessory:

During the wait, taking some time to dry your Lightning charger or accessory may shorten the wait time. Here are some steps you can take:

• If you find water on the Lightning port, carefully wipe it off with a dry paper cloth to make sure it is dry and free of moisture.
• With the Lightning port facing down, gently tap your iPhone to remove any remaining fluid.
• Repeat the same process for the Lightning cable. Wipe dry with a cloth, then pat lightly with your hands to remove any water droplets that may be between the contacts.
• Put the iPhone and the data cable in a dry and ventilated place. You might also consider placing them out of direct sunlight, which will speed up drying.
• Occasionally connect an accessory with a Lightning connector to your iPhone to see if it charges.
• If you still see the same notification, put your iPhone in a dry place for up to 24 hours, until it dries completely.

3. Try a different cable/accessory:

Try a different cable or accessory (if available) to rule out potential damage to the Lightning cable. While any inexpensive Lightning cable will work for charging, we strongly recommend using an MFi-certified cable to avoid compatibility issues or damage.

Likewise, if you have another Apple device with a Lightning port, test the same cable on that device. If the cable works fine with other devices, the problem may be with the iPhone's Lightning port, which may need to be dried.

5. Update your iPhone

This solution is not directly related to the problem, but in some cases the phone may freeze if the phone software is out of date. So why not update your iPhone to the latest iOS version and check it out?

Go to Settings > General > Software Update on your iPhone to see if an update is available. If an update is available, follow the onscreen instructions to download and install it on your iPhone.

6. Contact Apple Support:

If none of the methods listed above resolve the issue and you still receive the messageLiquid detected, Lightning connector not detectedIf the alarm is more than 24 hours old, it is likely that the Lightning port has suffered significant damage. In this case, go to the nearest Apple Store and have your iPhone checked by a professional.

What to Avoid When You Experience Liquid Detected in Lightning Connectors:

There are certain things you should avoid when you encounter an alert notification. Let's see:

• Do not attempt to repair or disassemble the device yourself as this may void your warranty and may do more harm than good.
• Do not attempt to force the charging process by frequently plugging and unplugging the Lightning cable.
• Don't put your iPhone in rice or silicone packaging, as they won't effectively remove moisture from the Lightning port, and small particles may physically damage your iPhone.
• Avoid using heat sources such as hair dryers, heaters, or compressed air to dry the Lightning port, as they may damage the device.
• Do not put any objects into the Lightning port, such as paper towels, cotton balls, etc.

FFrequently Asked Questions:

last words:

The Lightning connector liquid detection alert can be frustrating, but it's implemented to protect your device from serious hardware damage caused by water.

The best course of action is to leave your iPhone for a few hours until the port is completely dry. If possible, consider using a wireless charger instead of a traditional wall outlet, but make sure the back of the device is dry.

We all know iPhones aren't 100% waterproof, and an expensive Apple repair can take a toll on your wallet. So, I strongly recommend that you never connect a wet iPhone to a charger, except in an urgent emergency.