When you connect a charger to your iPhone, sometimes you see a message that says "Liquid detected in Lightning connector". This is nothing more than a security warning implemented by Apple. Now, on seeing this notification, you need to follow the below steps to fix this issue as soon as possible.
- Let your iPhone and Lightning cable dry.
- Force restart your iPhone
- Decide on the emergency bridge
- Go for a Wireless Charger
- Check the Lightning cable and see if it is damaged
- Always choose an Apple-certified charger and Lightning cable
"Liquid detected in Flash Connector" message indicates that the charging port contains moisture or the cables are wet. This moisture can damage your iPhone. That's why this article tells iPhone users how to fix this issue. The above points are discussed in detail below.
Then read on.
What should you do when iPhone displays "Liquid detected in Lightning connector" error?
If you are an iPhone user, you will see the message "Liquid detected in Lightning connector" because the iPhone has a built-in mechanism. This mechanism can locate moisture in the Lightning connector. This mechanism is quite effective, as the iPhone only has one port for connecting headphones and a charging cable.
Any smartphone, including the internals of iPhones, is vulnerable to moisture and liquids. Thanks iPhone! It contains a built-in system to notify its users. However, users are confused when they encounter this error message even if their iPhones are dry. Well, this is exactly the problem that iPhone SE3, iPhone X, iPhone 13 and iPhone 14 users are currently facing.
They said this error message often pops up on iPhone screens and hampers navigation. So far, the cause of this problem has not been found. If your iPhone's Lightning connector is wet or damp, you can start working on getting rid of it. The following points will help you to solve this problem.
How to Fix Liquid Detected in Lightning Connector on iPhone?
Step 1. Let iPhone and Charging Cable Dry
So, the first thing you should try is to disconnect all accessories or cables connected to your iPhone. Then turn it off. After that, you need to gently touch the iPhone in your palm. You need to face the Lightning connector down so you can drain any excess fluid.
Also, you should wipe moisture from the Lightning cable with a soft cloth or a piece of cotton. Your iPhone should be kept in a dry place (not exposed to direct sunlight) for at least 30-40 minutes. This allows air to dry your phone. You can now charge your phone with a Lightning accessory or Lightning cable. Meanwhile, you cannot use the iPhone.
Step 2. Force Restart iPhone
Sometimes this message can appear even when the iPhone is completely problem-free. Several transient failures can be the reason for this issue. In such a situation, you can perform a hard reset to get rid of this issue.
- You need to press the volume up button first and release it.
- Then you need to press and release the volume down button.
- After that, you need to press the power button on your iPhone until you see the Apple logo. This indicates that your iPhone will restart.
- Sit until the iPhone restarts successfully.
- Try reconnecting the charger.
Step 3. Decide on the Emergency Bypass
You can replace the liquid detected in the Lightning connector only if an emergency occurs and you need to charge your iPhone immediately.
- You must do this by disconnecting the iPhone's charging cable.
- After that, you need to connect your iPhone charger again.
- You will see the same "Liquid Detected" again when you do this. But now you need to select the "Emergency Replacement" option.
- After that, you can charge your iPhone.
Only try this method once you are sure your iPhone is completely dry.
Step 4. Decide to Use a Wireless Charger
Using a wireless charger is perhaps the easiest method you can try to remove the liquid detected error from your iPhone. If your iPhone supports wireless charging, you can use it for a while.
We highly recommend using an Apple-certified wireless charger. You can also use a Qi-certified charger to charge your iPhone wirelessly. In case you are planning to buy a wireless charger for your iPhone, try to buy a permanent wireless charger.
step5. Check the Lightning cable and see if it is damaged
You should always check the Lightning cable and see if it is damaged. Sometimes the Lightning cable can be damaged because you use it for a long time. Due to this, you may encounter this error message and experience problems charging your iPhone.
So check the cable very carefully and buy another cable if necessary.
step6. Always choose an Apple-certified charger and Lightning cable
As an iPhone user, you know very well that unauthorized Lightning cables or chargers will not work with your iPhone. Rather, they can severely damage your iPhone. So, if you are using an unknown brand of charging or lighting cable then this could be the reason for this error message. Consider purchasing an Apple-certified charger and Lightning cable.
Common questions-
Q1 Why does my phone keep saying "Liquid detected in Lightning connector"?
ResponderIf your iPhone keeps saying “Liquid detected in Lightning connector”, this is nothing more than a security warning that your iPhone is trying to warm you up. Whenever you see this notification on your iPhone, you must disconnect your phone charger immediately.
After that, you need to let it dry for at least 3-4 hours. However, you must remember not to leave your iPhone in the sun. Now, when the iPhone dries up, you should not immediately connect the charger or headphones to the Lightning connector. Make sure your iPhone is secure and connect the charger.
Q2. Can I replace the detected liquid in the Lightning connector?
ResponderFortunately, yes. You can only replace the liquid detected in the Lightning connector if an emergency occurs and you need to charge your iPhone immediately. You must do this by disconnecting the iPhone's charging cable. After that you need to connect the charger again.
You will see the same "Liquid Detected" again when you do this. But now you need to select the "Emergency Replacement" option. After that, you can charge your iPhone. However, if you feel that you cannot resolve the issue, contact an iPhone service center to resolve the issue.
Q3 How do I get liquid out of my charging port?
ResponderIf you notice that liquid has been detected in your iPhone's Message Lightning connector, start by removing the liquid from your phone's charging port. You should touch the iPhone against the palm of your hand very gently. You need to face the Lightning connector down so you can drain any excess fluid.
Your iPhone should be kept in a dry place (not exposed to direct sunlight) for at least 30-40 minutes. This allows air to dry your phone. You can now charge your phone with a Lightning accessory or Lightning cable.
final thoughts
Excess liquid can seriously damage your iPhone. So, when the message “Liquid detected in iPhone Lightning connector” appears, make sure you start doing whatever is necessary as soon as possible.
After taking all possible steps to fix this problem, we recommend using a wireless charger instead of a charging cable. This can further damage your phone's charging port. Also, you need to make sure the back of your iPhone is dry before switching it to a wireless charger. My best wishes!
Keep reading:-
- How to connect ps4 controller without usb
- How to Use Eunseo Bot Discord Like a Pro!
- Fix Onlyfans Mod Apk login error
FAQs
How do I fix my iPhone liquid detected by Lightning connector? ›
If your iPhone or Lightning accessory is wet
Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow. After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.
But if it's an emergency, you can override the liquid detected in lightning connector message and charge your phone. You can do so by removing the charging cable and then re-inserting it. The same “liquid detection" message will appear, but you'll now have the option to tap Emergency Override and charge your phone.
Why does it say liquid detected when there is no liquid? ›What Does Liquid Detected in Lightning Connector Mean? Apple calls the iPhone's charging port the Lightning Connector. So, when you get a message saying “Liquid Detected in Lightning Connector”, it means that there is water either in your iPhone's charging port or the charging cable is wet.
How do you force stop moisture detected in charging port? ›If moisture is detected in the USB port, an error message will be displayed and charging will stop. In this case, unplug your device from the charger, then wipe with a dry cloth or gently shake your device (5-10 times) with the port facing downwards to release any excess moisture.
How long does it take for moisture detected to go away? ›Let the device air dry for at least 24 hours before turning it on again or plugging it into power, or else further damage may occur. If no moisture is seen or suspected: First, plug your phone into the charger, at which point you should still receive the error.
How long does a Lightning connector take to dry? ›It may take several hours for your iPhone's charge to become available again. - Liquid inside the Lightning connector: we recommend disconnecting the cable and even turning off the iPhone to dry it out. It may take several hours... So be patient!
What happens if you emergency override liquid in charging port? ›Override for Emergency. Because there is moisture or liquid in the iPhone's charging port, you receive this notice when it's plugged in. This notice indicates that charging via the charging port is not possible on your device.
How do I turn off moisture detection? ›- Clear USB Cache. ...
- Disable Fast Charging. ...
- Charge Your Phone via Computer. ...
- Sign Out and Sign In to Your Samsung Account. ...
- Try Safe Mode. ...
- Use Wireless Charger.
Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any liquid other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry, soft cloth.
How can I dry my charging port faster? ›Put Your Phone in Front of a Fan, or Leave it to Dry Naturally. If you want to speed up the drying process of your phone's USB port, we recommend placing it in front of a fan or even near an open window (if you're sure it's not going to rain!).
How do you bypass fluid in a charging port? ›
- Let the charger be plugged in the phone.
- Press & hold these buttons together: power + volume up + Bixby.
- Android logo will be displayed. ...
- Press the volume down key several times to enter android system recovery option screen.
- Broken Pins in Phone Charger Port. Similarly, if pins inside the port become broken or bent, correct charging will become impossible. ...
- Debris in Phone Charger Port. ...
- Charger Cable and Adapter Work With Other Devices. ...
- Faulty Phone Charger Adapter. ...
- Defective Phone Battery.
Liquid Detected in Lightning Connector - But phone did not get wet... If you see this alert every time you connect a certain cable or accessory, that cable or accessory might be damaged. Contact the manufacturer. If you see this alert every time you connect an Apple Lightning cable or accessory, contact Apple Support."
How do I clean my iPhone charging port? ›Using a can of compressed air is the safest way to clean your iPhone's port. Hold the can upright but not too close to the port, and apply a few short blasts of air. You should see small particles falling out of the phone charging port. This is also an option if you need to clean your AirPods and AirPods case.
Why won't the moisture detected won't go away? ›If your device displays a water drop icon which signifies moisture detection, you should power off your device and leave it to dry completely. If the icon does not go away and you continue to experience issues with charging, try clearing your USB cache.
How do you air dry a charging port? ›Leave your device in a dry area for at least an hour with the charging port facing down. This will allow airflow into the port and force excess water to drip out on its own. If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.
What can cause false moisture readings? ›The most common cause is metal hidden in or behind the material being checked. Corner beads, metal studs, foil-backed insulation and metal lath in plaster walls are all common examples. Dense materials such as concrete and plaster also read “wetter” on a non-invasive meter.
What absorbs moisture quickly? ›If solving your moisture problem is something you'd like to do inexpensively, rock salt may be your answer. Because rock salt is hygroscopic it absorbs moisture from the air. If your plan is to get rid of the humidity in a damp basement, start with a 50-pound bag of sodium chloride to make your rock salt dehumidifier.
How can you tell where moisture is coming from? ›One of the best ways to get quantifiable measurements of moisture in the home is to use a moisture meter! There are many different types of moisture meters on the market. Some of these meters have different calibration settings for checking moisture in wood, drywall, and other materials.
Should I emergency override liquid detected? ›If your iPhone hasn't been exposed to water or liquid, and there isn't any dust in the connector, you can safely tap the emergency override button. As mentioned, this button will both dismiss the alert and allow the phone to resume its normal function.
What happens if I press emergency override on my iPhone? ›
Select Emergency Override
Selecting this option will enable you to charge your iPhone by overriding the automatic charging disablement feature. This option is to be used if it is an emergency and you need to charge your phone. This will start charging but also this may damage your iPhone.
If you reconnect your iPhone to the Lightning cable or accessory, you have the option to override the liquid detection and charge your iPhone in an emergency. If you have a wireless charger, you can still use that to charge your iPhone.
How do I undo emergency override? ›You cannot directly turn off Emergency Override Mode. However, you can immediately disconnect the iPhone from the charger to exit the Emergency Override mode.
How accurate are moisture detectors? ›A high-quality moisture meter used on the right material can be accurate to within less than 0.1% of the material's moisture content by weight. However, a low-end moisture meter can be wildly inaccurate.
Will it destroy my phone to charge it with a slightly wet charging port? ›If your iPhone has been exposed to liquid, unplug all cables and do not charge your device until it's completely dry. Using accessories or charging when wet may damage your iPhone. Allow at least 5 hours before charging or connecting a Lightning accessory.
Can water permanently damage charging port? ›Anything that could expose your charge port and therefore the inside of your phone to moisture may damage the wiring. If your phone gets wet, immediately turn it off and get it as dry as possible. The longer it is exposed to water, the more water will leak in through the charge port and headphone jack.
Can I dry my phone with a hair dryer? ›Do not -- we repeat, do not -- use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed. Dry all those things off.
Will my charger port dry on its own? ›Let it Evaporate. Believe it or not, the most effective way to dry your phone is to leave it till the moisture evaporates naturally. Usually, the moisture trapped inside the port should evaporate on its own in a few hours. Make sure you keep your device in an upright position where it's well-ventilated.
How long does it take for liquid to get out of Lightning connector? ›Leave your iPhone in a dry and well-ventilated place for up to a day. During this time, you can try charging or connecting a lightning item again. It could take up to 24 hours for everything to dry completely.
How do I turn off liquid detection on my iPhone? ›- Step 1: For this, press the volume up button and release quickly. Then press and release the volume down button.
- Step 2: In the end, press and hold the side button for a few seconds until an Apple logo appears.
How long does it take for water to dry out of charging port? ›
Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any liquid other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry, soft cloth.
How do you override a wet charging port? ›- Let the charger be plugged in the phone.
- Press & hold these buttons together: power + volume up + Bixby.
- Android logo will be displayed. ...
- Press the volume down key several times to enter android system recovery option screen.
Do not -- we repeat, do not -- use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed. Dry all those things off.